Kide · De Aar
Cold Room Construction for Kide Systems in Macadamia Processing | De Aar Industrial
Insulated panel cold rooms built, sealed and commissioned as one contract. We support Kide modular cold room panels and doors running R404A, R134a in macadamia processing across De Aar Industrial and De Aar Industrial.
Technical highlights
SAQCC Gas certified cold room construction
SANS 10147 pressure and gas compliance, genuine Kide OEM parts and rapid dispatch to De Aar Industrial.
- SAQCC Gas registered technicians handling R404A, R134a
- SANS 10147 pressure vessel and installation compliance
- Genuine Kide OEM parts — Kide panel locks, gaskets, heated frames and door hardware
- 3–6 weeks per room to De Aar Industrial, De Aar
Common maintenance vectors
What we find on these systems
- Panel joint sealing
- Vapour barrier continuity
- Floor junction thermal bridging
- Cam-lock slippage opening panel joints
- Door seal compression set causing frost ingress
- Frame heater tape failure freezing doors shut
Dynamic specifications
Macadamia Processing duty on Kide plant
Dry-store climate control and kernel holding rooms
| Typical system duty | +8 °C to +15 °C (−2 °C to +12 °C room design) |
|---|---|
| Design humidity | 55–65% RH |
| Recommended gas / pressure class | R404A, R134a — handled by SAQCC Gas registered technicians |
| Equipment platform | Kide Modular cold room panels and doors — Injected PU sandwich panels, hinged and sliding cold room doors |
| Compliance frameworks | HACCP, FSSC 22000, SANS 10147, SAQCC Gas registration |
| OEM parts held | Kide panel locks, gaskets, heated frames and door hardware |
| Service deliverable | Heat load calculation and commissioning report |
| Response / lead time | 3–6 weeks per room |
| Location hub | Serving De Aar Industrial and surrounds off the N10 / N12 |
Local context
Working in De Aar Industrial
We service De Aar Industrial and the surrounding blocks of De Aar Industrial, De Aar, with access off the N10 and N12. Extreme summer ambients above 40 °C mean condensers, gas charge and high-pressure protection must be specified for worst-case, not average, days.
Dehumidification-dominant load with low sensible duty Moisture pickup drives rancidity and kernel downgrade
Compliance
Documentation you receive
- HACCP
- FSSC 22000
- SANS 10147
- SAQCC Gas registration
- Heat load calculation and commissioning report
FAQ
Kide cold room construction in De Aar Industrial
How fast can a technician service Kide equipment at a macadamia processing site in De Aar Industrial?
De Aar Industrial sits on the N10 and N12, so our De Aar dispatch reaches most De Aar Industrial sites inside a standard callout window. Emergency cold room construction runs 24/7 because moisture pickup drives rancidity and kernel downgrade.
Do you stock OEM components for Kide systems?
Yes — Kide panel locks, gaskets, heated frames and door hardware. Kide (Spain) equipment on R404A/R134a charges is supported with the fast-moving spares held at our Pretoria North workshop and non-stock items brought in on OEM order.
What pressure testing and gas compliance certificates are provided?
Every cold room construction job closes with a pressure test record and gas handling Certificate of Conformance issued under SANS 10147 by a SAQCC Gas registered technician, plus the HACCP documentation your auditors expect.
What operating envelope do you commission this equipment to?
Macadamia Processing run at +8 °C to +15 °C at 55–65% RH, with cold room construction performed against −2 °C to +12 °C room design. Moisture pickup drives rancidity and kernel downgrade
Related services & locations
- Cold Room Construction — Kimberley Industrial
- Cold Room Construction — Upington Industrial
- Cold Room Construction — Kakamas Industrial
- Cold Room Construction — Keimoes Industrial
- Cold Room Construction — Springbok Industrial
- Cold Room Construction — Kathu Industrial
- Evapco Cold Room Construction — De Aar Industrial
- Banana Ripening Facilities — De Aar Industrial
- Flower & Floristry Coolers — De Aar Industrial
- Meat Wholesalers & Butcheries — De Aar Industrial
- Bakery & Dough Retarding — De Aar Industrial
Get started
Schedule an on-site diagnostic in De Aar Industrial
Tell us what you need cooled and where. We respond with a scoped quote, and for emergencies we dispatch straight away.
- Phone / WhatsApp
- 069 268 0988
- info@reyds.co.za
- Workshop
- 386 Eeufees Street, Pretoria North, Gauteng
- Hours
- Mon–Fri 07:00–17:00, Sat 08:00–13:00. 24/7 emergency breakdown line.